WHAT IT IS?
The acoustic clamp-on meter provides accurate, reliable and cost effective flow rate and water cut measurement  with accuracy of 1% absolute. A single tool that can measure both flow rate and water cut for 0-100%.

HOW IT WORKS?
Non-intrusive clamp-on ultrasonic flow meter technology providing helical signal transmission, enabling off-center measurement and the ability of almost tomographic pattern measurement. The patented clamp-on multipath ultrasonic technology is perfectly suitable to be installed on the outside of a pipe  to measure with high accuracy.

APPLICATIONS?

• Pipeline: Meter could be clamped on the pipe from 1.5in diameter to 36in diameter.
• Separator: Meter could be installed at 2-phase or 3-phase separator.
• Water or Gas  Injection: This meter measures the water flows from outside of the pipe and is therefore not in contact with the water itself. There is no risk for corrosion, erosion or scaling from the injection water at all. In addition to measuring flow rates, XSENS is also capable of measuring the salinity of the injection water.

BENEFITS TO CLIENT

• Cost: Clamp-on 2-in-1 meter allows saving up to 70% saving
• Reliability and maintenance: The clamp-on meters are non-intrusive meter, and are not subject to corrosive fluids. Therefore, there is no risk for erosion, corrosion, waxing or scaling. Minimal maintenance is required. These meters are designed for 20 years life time.
• Safety: By installation of clamp-on meter, pipe integrity is never broken. The clamp-on meter have no potential leak points and will not cause any risk for leakage of oil or gas. Installation does not cause any harm or risk for personnel, as the Meter is clamped to the outside of the pressurized pipe.